Latest Mar 20, 2024 Real 500-220 Exam Dumps Questions Valid 500-220 Dumps PDF
Cisco 500-220 Exam Dumps - PDF Questions and Testing Engine
Passing the Cisco 500-220 Exam leads to the Cisco Certified Specialist - Meraki Solutions certification. Engineering Cisco Meraki Solutions certification validates the candidate's expertise in engineering solutions using Cisco Meraki and demonstrates their ability to design, implement, and troubleshoot Meraki products and solutions. Engineering Cisco Meraki Solutions certification is highly valued by employers in the IT industry, as it demonstrates the candidate's commitment to professional development and their ability to contribute to the success of their organization.
NEW QUESTION # 14
A new application needs to be pushed to all iOS devices. Some devices report "NotNow" in the event log and do not install the application.
What does the "NotNow" event indicate?
- A. The device is locked with a passcode.
- B. The application requires the most recent iOS version.
- C. The device cannot connect to Apple servers.
- D. The device cannot connect to Cisco Meraki servers.
Answer: A
Explanation:
Explanation
The error message "NotNow" is seen in the Event Log on an iOS device's details page when an action cannot be performed because the device is locked with a passcode. These actions include pushing managed apps, installing profiles, and other actions. When this occurs the device will attempt to re-connect with the MDM server as soon as the device is unlocked in order to retry the action.
https://documentation.meraki.com/SM/Monitoring_and_Reporting/Status_of_%22NotNow%22_in_Systems_Ma
NEW QUESTION # 15
Drag and drop the descriptions from the left onto the permission types on the right.
Answer:
Explanation:
NEW QUESTION # 16
Refer to the exhibit.
Assuming this MX has established a full tunnel with its VPN peer, how will the MX route the WebEx traffic?
- A. WebEx traffic will prefer WAN 1 as it is the primary uplink.
- B. WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the "Conf" performance class.
- C. WebEx traffic will be load-balanced between both active WAN links.
- D. WebEx traffic will prefer WAN 2 as long as it is up.
Answer: B
Explanation:
Explanation
Assuming this MX has established a full tunnel with its VPN peer, the MX will route the WebEx traffic based on the SD-WAN policy configured in the exhibit. The SD-WAN policy has two performance classes: Conf and Default. The Conf performance class matches the traffic with destination port 9000, which is used by WebEx for VoIP and video RTP3. The Conf performance class has a preferred uplink of WAN 2 and a failover uplink of WAN 1. It also has thresholds for latency, jitter, and loss that determine when to switch from the preferred uplink to the failover uplink. Therefore, the WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the Conf performance class. If WAN 2 exceeds the thresholds or goes down, the WebEx traffic will switch to WAN 1 as the failover uplink.
NEW QUESTION # 17
Refer to the exhibit.
Which condition or conditions will cause the "All Databases & cloud services" SD-WAN traffic to be routed via a VPN2 tunnel on WAN2?
- A. WAN1 tunnel latency is 20 ms or more, and WAN2 tunnel meets the configured performance criteria.
- B. WAN1 tunnel latency is 20 ms or less, irrespective of WAN2 tunnel performance.
- C. WAN1 tunnel latency is 20 ms or less, and WAN2 tunnel meets the configured performance criteria.
- D. WAN1 tunnel latency is 20 ms or more, irrespective of WAN2 tunnel performance.
Answer: A
Explanation:
Explanation
This is because the SD-WAN policy for "All Databases & cloud services" has the following settings:
Uplink selection policy: Prefer WAN1, Fail over if down
Traffic filters: Custom performance classes
Custom performance classes: Database
Database performance criteria: Maximum latency 200 ms, Maximum jitter 20 ms, Maximum loss 1% This means that the SD-WAN traffic will be routed via WAN1 by default, unless WAN1 is down or fails to meet the database performance criteria. In that case, the traffic will be routed via WAN2, if WAN2 meets the database performance criteria. Therefore, the condition that will cause the traffic to be routed via WAN2 is when WAN1 tunnel latency is 20 ms or more (which exceeds the maximum jitter of 20 ms), and WAN2 tunnel meets the configured performance criteria (maximum latency 200 ms, maximum jitter 20 ms, maximum loss
1%).
NEW QUESTION # 18
Where should a network admin navigate to investigate wireless mesh information between Meraki APs?
- A. Wireless > Configure > Radio Settings
- B. Wireless > Monitor > Wireless Health
- C. Wireless > Monitor > Access Points > AP > RF
- D. Wireless > Monitor > RF Spectrum
Answer: C
Explanation:
Explanation
See Monitoring Mesh section Mesh monitoring tools are located at the bottom of every AP detail page, which can be accessed by navigating to Wireless > Monitor > Access Points, then clicking on an Access Point.
https://documentation.meraki.com/MR/Wi-Fi_Basics_and_Best_Practices/Wireless_Mesh_Networking
NEW QUESTION # 19
Company iPads are enrolled in Systems Manager without supervision, and profiles are pushed through Systems Manager.
Which outcome occurs when a user attempts to remove the "Meraki Management" profile on an iPad?
- A. The "Meraki Management" profile is removed and then pushed automatically by Systems Manager.
- B. The "Meraki Management" profile is removed. All the profiles Systems Manager pushed remain.
- C. The "Meraki Management" profile is removed. All the profiles that Systems Manager pushed are also removed.
- D. The "Meraki Management" profile cannot be removed.
Answer: C
Explanation:
Explanation
On the device, navigate to Settings > General > Device Management
Select Meraki Management, and select Remove to delete the management profile and any managed configuration profiles installed via SM
NEW QUESTION # 20
Refer to the exhibit.
The VPN concentrator is experiencing issues. Which action should be taken to ensure a stable environment?
- A. Add a deny any/any firewall rule to the end of the firewall rules.
- B. Configure the MX appliance to Routed mode on the Addressing & VLANS page.
- C. Physically disconnect all LAN ports.
- D. Remove the connection from Internet 1.
Answer: C
Explanation:
Explanation
Before deploying MXs as one-arm VPN concentrators, place them into Passthrough or VPN Concentrator mode on the Addressing and VLANs page. In one-armed VPN concentrator mode, the units in the pair are connected to the network "only" via their respective 'Internet' ports. Make sure they are NOT connected directly via their LAN ports. Each MX must be within the same IP subnet and able to communicate with each other, as well as with the Meraki dashboard. Only VPN traffic is routed to the MX, and both ingress and egress packets are sent through the same interface.
https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/Best
NEW QUESTION # 21
Which three verbs of request are available in the Cisco Meraki API? (Choose three.)
- A. PATCH
- B. GET
- C. POST
- D. ADD
- E. PUT
- F. SET
Answer: B,C,E
Explanation:
Reference:
Cisco_Meraki_Dashboard_API
NEW QUESTION # 22
Which VLAN is used to source pings across the site-to-site VPN when using the MX Live tools?
- A. highest VLAN ID that is configured and set to YES to use VPN
- B. highest VLAN ID that is configured and set to NO to use VPN
- C. lowest VLAN ID that is configured and set to YES to use VPN
- D. lowest VLAN ID configured and set to NO to use VPN
Answer: A
Explanation:
Explanation
See Behavior - Firmware MX 15.11 or Lower section For MXs running firmware MX15.11 or below, the source IP that MX uses while pinging a destination is the MX IP of highest VLAN ID. If the destination is across a VPN, the MX uses the MX IP of highest VLAN ID participating in VPN. For MXs running firmware MX 15.12+, additional ping options have been added to the live tool. The ping tool now has a drop down to select the source IP address for pinging destinations from the MX.
https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Ping_Live_T
NEW QUESTION # 23
Refer to the exhibit.
What are the Loss and Average Latency statistics based on?
- A. responses that the MX appliance receives on the connectivity-testing IP addresses on the Security & SD- WAN > Firewall page
- B. responses that the MX appliance receives on the connectivity-testing IP addresses on the Help > Firewall info page
- C. responses that the MX appliance receives on the connectivity-testing hostnames on the Insight > Web App Health page
- D. responses that the MX appliance receives on the connectivity-testing IP address that is configured on the Security & SD-WAN > SD-WAN & Traffic Shaping page
Answer: D
Explanation:
Explanation
Quote from referred documentation-Link: Loss and latency will be determined over the configured IP address under Security and SD-WAN > SD-WAN and Traffic Shaping > Uplink Statistics. If no IP is configured, these values will be measured against 8.8.8.8 by default. On the WAN Health page, all the configured IP address statistics can be reviewed by changing the destination under the "Ping Destination" column.
https://documentation.meraki.com/MI/MI_WAN_Health#:~:text=Current%20loss%20and%20latency%20statist
NEW QUESTION # 24
Drag and drop the settings from the left onto the OS system or systems that support it on the right Settings can be used more than once.
Answer:
Explanation:
Explanation
IOS:
Kiosk mode
Single App mode
Wallpaper
Cisco Security Connector
Active Sync
Android:
Kiosk mode
Backpack
Wallpaper
Active Sync
This question is related to the topic of in the Cisco Meraki documentation.
You can find more information about this topic in the [System Manager: Getting Started] article or the
[System Manager Overview] page.
https://documentation.meraki.com/SM/Profiles_and_Settings/Configuration_Settings_Payloads
NEW QUESTION # 25
What are two ways peers interact with ports that Auto VPN uses? (Choose two.)
- A. For IPsec tunneling, peers use high UDP ports within the 32768 to 61000 range.
- B. For IPsec tunneling, peers use UDP ports 500 and 4500.
- C. Peers contact the VPN registry at TCP port 9350.
- D. For IPsec tunneling, peers use high TCP ports within the 32768 to 61000 range.
- E. Peers contact the VPN registry at UDP port 9350.
Answer: D,E
Explanation:
Reference:
_Configuration_and_Troubleshooting
NEW QUESTION # 26
Refer to the exhibit.
A packet arrives on the VPN concentrator with source IP 10.168.70.3 and destined for IP 10.116.32.4.
What is the next hop for the packet, based on this concentrator routing table?
- A. The Auto VPN peer "Store 1532 - appliance" is the next hop.
- B. Not enough detail is available to determine the next hop.
- C. The concentrator gateway (10.128.124.62) is the next hop.
- D. The packet is stopped.
Answer: A
Explanation:
Explanation
This can be determined by looking at the concentrator routing table and finding the entry for the destination IP
10.116.32.4. The next hop for this entry is the Auto VPN peer "Store 1532 - appliance".
This question is related to the topic of Implementing Dynamic Routing Protocols in the Engineering Cisco Meraki Solutions (ECMS) official training documentation. You can find more information about this topic in the ECMS v2.2 Course Overview or the ECMS1 v2.1 Course Overview.
NEW QUESTION # 27
Drag and drop the descriptions from the left onto the corresponding MX operation mode on the right.
Answer:
Explanation:
NEW QUESTION # 28
Refer to the exhibit.
What are two outcomes reflected in the Web App Health application? (Choose two.)
- A. Network #1 could not load Google because of a remote server issue.
- B. Network #2 had better application performance than Network #1.
- C. Neither network recorded any server-side performance issues.
- D. Users on both networks may be experiencing issues when attempting to reach Google.
- E. Network #2 could not load Google because of a local client misconfiguration.
Answer: C,D
NEW QUESTION # 29
Refer to the exhibit.
What is the minimal Cisco Meraki Insight licensing requirement?
- A. Two Meraki Insight licenses must be configured on network A and a single license must be configured on network B, to gain Web App Health visibility on network B.
- B. Two Meraki Insight licenses must be configured on network A to gain Web App Health visibility on network B.
- C. A single Meraki Insight license must be configured on network A, and a single license must be configured on network B, to gain Web App Health visibility on network B.
- D. A single Meraki Insight license must be configured on network A to gain Web App Health visibility on network B.
- E. A single Meraki Insight license must be configured on network B to gain Web App Health visibility on network B.
Answer: E
Explanation:
Explanation
If you only need traffic statistics from your spoke site clients then you only need to enable insight on the spoke network as the hub site will not gather data for remote sites.
https://community.meraki.com/t5/Wireless-LAN/Meraki-Insight-Licensing/m-p/152684 A license is only required for those networks where Meraki Insight functionality is desired. One license is required per network, regardless of whether that network has a single MX or HA pair. Licenses can be moved between networks, but historical data for the old network will be lost.
https://meraki.cisco.com/lib/pdf/meraki_datasheet_mi.pdf
NEW QUESTION # 30
Air Marshal has contained a malicious SSID.
What are two effects on connectivity? (Choose two.)
- A. Currently associated clients are affected by restrictive traffic shaping rules.
- B. New clients can connect.
- C. New clients cannot connect.
- D. Currently associated clients stay connected.
- E. Currently associated clients are disconnected.
Answer: C,E
NEW QUESTION # 31
Refer to the exhibit.
A packet arrives on the VPN concentrator with source IP 10.168.70.3 and destined for IP 10.116.32.4.
What is the next hop for the packet, based on this concentrator routing table?
- A. The Auto VPN peer "Store 1532 - appliance" is the next hop.
- B. The concentrator gateway (10.128.124.62) is the next hop.
- C. The packet is stopped.
- D. Not enough detail is available to determine the next hop.
Answer: D
NEW QUESTION # 32
When an SSID is configured with Sign-On Splash page enabled, which two settings must be configured for unauthenticated clients to have full network access and not be allow listed? (Choose two.)
- A. Controller disconnection behavior
- B. Simultaneous logins
- C. RADIUS for splash page settings
- D. Firewall & traffic shaping
- E. Captive Portal strength
Answer: A,E
NEW QUESTION # 33
A customer requires a hub-and-spoke Auto VPN deployment with two NAT-mode hubs with dual uplink connections and 50 remote sites with a single uplink connection.
How many tunnels does each hub need to support?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 34
How does a Meraki device behave if cloud connectivity is temporarily lost?
- A. The offline device continues to run with its last known configuration until cloud connectivity is restored.
- B. The offline device tries to form a connection with a local backup sever.
- C. The offline device reboots every 5 minutes until connection is restored.
- D. The offline device stops passing traffic.
Answer: A
Explanation:
Explanation
What happens if a network loses connectivity to the Meraki cloud?
Because of Meraki's out of band architecture, most end users are not affected if Meraki wireless APs, switches, or security appliances cannot communicate with Meraki's cloud services (e.g., because of a temporary WAN failure):
* Users can access the local network (printers, file shares, etc.)
* If WAN connectivity is available, users can access the Internet
* Network policies (firewall rules, QoS, etc.) continue to be enforced
* Users can authenticate via 802.1X/RADIUS and can roam wirelessly between access points
* Users can initiate and renew DHCP leases
* Established VPN tunnels continue to operate
* Local configuration tools are available (e.g., device IP configuration
https://meraki.cisco.com/lib/pdf/meraki_datasheet_cloud_management.pdf
NEW QUESTION # 35
......
Cisco 500-220 exam consists of multiple-choice questions, and the passing score is 70%. 500-220 exam is time-limited, and candidates have 90 minutes to complete it. 500-220 exam fee is $300, and it can be taken at any Pearson VUE testing center worldwide. 500-220 exam is available in English and Japanese languages.
Reliable Cisco Meraki Solutions Specialist 500-220 Dumps PDF Mar 20, 2024 Recently Updated Questions: https://measureup.preppdf.com/Cisco/500-220-prepaway-exam-dumps.html