Latest [Jul 18, 2024] Real Juniper JN0-682 Exam Dumps Questions
JN0-682 Dumps To Pass JNCIP-DC Exam in One Day (Updated 155 Questions)
NEW QUESTION # 37
Exhibit.
You are attempting to configure filter-based forwarding in your data center. All traffic from Host1 that is going to Host2 should be inspected by the data center firewall. You have verified that the traffic is being forwarded from router leaf L1's VRF-1 to its INSPECT-VRF. however, the traffic is not reaching service L2.
Referring to the exhibit, which two steps should you take to troubleshoot the problem? (choose two.)
- A. Examine the INSPECT-VRF.inet. 0 route table on L1 for a default route that will direct the traffic to L2.
- B. Ensure that the route target in the INSPECT-VRF of L1 matches the route target of the INSPECT-VRF of L2.
- C. Ensure that VRF-1 and INSPECT-VRF route targets on L1 and L2 match.
- D. Examine the INSPECT-VRF.evpn 0 route table on L1 for a default route that will direct the traffic to L2.
Answer: A,B
NEW QUESTION # 38
You are asked to enable plug-and-play line card switches in an active VCF without making any future Junos configuration charges. You are also required to ensure that all new line card are automatically upgrade to the correct Junos version without any manual intervention. In this scenario, which two actions will accomplish this task? (Choose two.)
- A. Set the Virtual Chassis as per-provision before the line are inserted.
- B. Set the virtual Chassis as auto-provisioned before the line cars are inserted.
- C. Ensure that the newly instead card's MAC addresses are present in the DHCP configuration for ZTP.
- D. Configure the auto-sw-update parameter on the VCF before inserting new line cards.
Answer: B,D
NEW QUESTION # 39
Which event triggers the generation of a EVPN type-4 route?
- A. When a new ESI is configured.
- B. When unknown unicast traffic is received on an interface.
- C. When a new VNI is configured.
- D. When known unicast traffic is received on an interface.
Answer: A
NEW QUESTION # 40
You are deploying an EBGP IP fabric. In this scenario, which statement is true?
- A. Each spine should peer with every other spine using loopback addresses.
- B. Each spine should peer with each leaf using physical addresses.
- C. Each spine should peer with each leaf using loopback addresses.
- D. Each spine should peer with every other spine using physical addresses.
Answer: B
NEW QUESTION # 41
You are building a new IP fabric data center underlay network and want to ensure predicted load- balancing behavior for traffic, traversing the fabric. What are two approaches you should take to satisfy the requirement in this scenario? (Choose two.)
- A. Ensure that every node has a link to every other leaf node
- B. Ensure that all spine devices are the same switched mode.
- C. Ensure that every leaf node has an uplink spine node
- D. Ensure that all uplinks are 40GbE.
Answer: B,C
Explanation:
A) Ensuring that all spine devices are of the same type (switched mode) can contribute to predictable load-balancing behavior due to consistent handling of traffic across all spine nodes.
C) Ensuring that every leaf node has an uplink to every spine node helps in achieving even load distribution and redundancy, contributing to predictable load-balancing in the fabric.
NEW QUESTION # 42
Exhibit.
An EVPN-signaled VXLAN overlay has been deployed in the network shown in the exhibit. An EVPN LAG has been configured to connect host1 to the network, and device leaf1 has been elected as the designated forwarder. In this scenario, which statement is true?
- A. Broadcast packets sent from host2 will not be forwarded to Ieaf2.
- B. An ICCP control link must be configured between leaf1 and Ieaf2.
- C. The Ieaf3 device will only receive an advertisement to the LAG segment from leaf1.
- D. The Ieaf3 device can utilize both leaf1 and Ieaf2 to forward unicast packets from host2 to host1.
Answer: C
NEW QUESTION # 43
Exhibit.
You choose the EBGP fabric design as shown in the exhibit. In addition to a load-balancing policy, you want to ensure that the 10.1/16 prefix is sent to the leaf nodes.
Which two commands on the spine will accomplish this task? (Choose two.)
- A. advertise-peer-as
- B. as-override
- C. loops 2
- D. add-path send
Answer: A,B
NEW QUESTION # 44
You are asked to design a deployment plan for a large number of QFX Series switches using ZTP. The ZTP deployment plan must ensure all switches are configured with their designated configuration file.
Which DHCP option and subscription combination would be used to accomplish this task?
- A. DHCP option 43 a suboption of 00.
- B. DHCP option 43 a suboption of 01.
- C. DHCP option 66 a suboption of 01.
- D. DHCP option 66 a suboption of 00.
Answer: B
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/ztp-configuring.html 6. Configure the following DHCP option 43 suboptions: * Suboption 01: The name of the script or configuration file to install.
NEW QUESTION # 45
You are creating a new EVPN and are asked to selectively accept certain MAC advertisement routers from your EVPN peers using VXLAN Encapsulation.
Which statements is correct in this scenario?
- A. You can use firewall filters to filters out unwanted routes
- B. You can use VBRF import policies and community values to filter out unwanted routes.
- C. You can use VRF policies and route distinguisher values to filter out unwanted routes.
- D. You can use MAC filtering to filter out unwanted routes.
Answer: B
NEW QUESTION # 46
Which EVPN router type prevents BUM traffic from looping back to a multihued host?
- A. Ether auto discovery route
- B. Ethernet segment router
- C. Inclusive multicast-Ethernet tag route
- D. IP prefix route
Answer: A
NEW QUESTION # 47
You are asked to scale the available bandwidth within your Clos data center network to support more east-west traffic. In this scenario, what are two ways to accomplish this task? (Choose two.)
- A. Interconnect all spines to increase available paths and bandwidth.
- B. Add spines to increase available paths and bandwidth.
- C. Use aggregated interfaces in the fabric.
- D. Add leaf devices to increase available paths and bandwidth
Answer: B,C
NEW QUESTION # 48
What are two methods used to scale an IBGP IP Fabric? (Choose two.)
- A. Route reflection
- B. Redundant trunk groups
- C. Spanning tree
- D. Confederations
Answer: A,D
Explanation:
Route reflection and confederations are two methods used to scale IBGP in an IP fabric. Route reflection allows an IBGP router to advertise routes received from one IBGP peer to another, reducing the number of IBGP sessions required. Confederations divide an autonomous system into smaller sub-autonomous systems, simplifying the internal BGP routing policy and management.
Reference:
Juniper Networks - BGP Route Reflection
Juniper Networks - BGP Confederations
NEW QUESTION # 49
Exhibit.
Site 1 contains 20+ VMs. The link between Site 1 and Leaf1 goes down.
Referring to the exhibit, which statement is correct?
- A. Type-1 routes for each VM will expire one at a time.
- B. Type-1 routes for all VMs in the site will expire all at once.
- C. Type-1 routes for each VM will be withdrawn one at a time.
- D. Type-1 routes for all VMs in the site will be withdrawn all at once.
Answer: D
NEW QUESTION # 50
You choose the EBGP design shown in the exhibit as your IP fabric design. You must ensure that both routes received by the spine nodes will be used for ECMP forwarding.
Which BGP parameter would need to be added to the EBGP configuration of the spine nodes to achieve this goal?
- A. add-path
- B. multipath multiple-as
- C. multihop
- D. multipath
Answer: A
NEW QUESTION # 51
Referring to the exhibit, Host 1 and Host 3 have exchanged traffic.
In this scenario, which statement is true?
- A. Leaf 2 does not learn Host 1's MAC address until Host1 and Host2 send traffic to each other
- B. Leaf 2 learn Host 1's MAC address through periodic updates from Spine 2
- C. Leaf 2 learn Host 1's MAC address when Host 3 learns Host 1's MAC address.
- D. Leaf 2 learn Host 1's MAC address when Leaf 1 queries Host 1.
Answer: C
NEW QUESTION # 52
Referring to the exhibit,
which two statements are correct? (Choose two.)
- A. The irb. 0 interface is the remote tunnel endpoint interface.
- B. There are two tunnels to the remote endpoint.
- C. The source tunnel IP address is 192.168.100.11.
- D. There is one tunnel to the remote endpoint.
Answer: C,D
NEW QUESTION # 53
......
Juniper JN0-682 exam is designed for professionals who want to validate their knowledge and skills in data center technologies. Data Center, Professional (JNCIP-DC) certification exam is intended for individuals who have a strong background in networking technologies and want to specialize in data center technologies. JN0-682 exam is focused on testing the candidate's knowledge in data center design, implementation, and troubleshooting.
JN0-682 Exam Brain Dumps - Study Notes and Theory: https://measureup.preppdf.com/Juniper/JN0-682-prepaway-exam-dumps.html