FCP_FAZ_AN-7.6 Dumps (2026) Prepare Your Exam With 68 Questions
New FCP_FAZ_AN-7.6 Dumps - Real Fortinet Exam Questions
NEW QUESTION # 22
Exhibit. What is the analyst trying to create?
- A. The analyst is trying to create a report in the playbook.
- B. The analyst is trying to create an output variable to be used in the playbook.
- C. The analyst is trying to create a trigger variable to the used in the playbook.
- D. The analyst is trying to create a SOC report in the playbook.
Answer: B
Explanation:
In the exhibit, the playbook configuration shows the analyst working with the "Attach Data" action within a playbook. Here's a breakdown of key aspects:
Incident ID: This field is linked to the "Playbook Starter," which indicates that the playbook will attach data to an existing incident.
Attachment: The analyst is configuring an attachment by selecting Run_REPORT with a placeholder ID for report_uuid. This suggests that the report's UUID will dynamically populate as part of the playbook execution.
Option B - Creating an Output Variable:
The field Attachment with a report_uuid placeholder suggests that the analyst is defining an output variable that will store the report data or ID, allowing it to be attached to the incident. This variable can then be referenced or passed within the playbook for further actions or reporting.
NEW QUESTION # 23
A playbook contains five tasks in total. An administrator runs the playbook and four out of five tasks finish successfully, but one task fails.
What will be the status of the playbook after it is run?
- A. Failed
- B. Upstream_failed
- C. Success
- D. Attention required
Answer: D
Explanation:
In FortiAnalyzer, when a playbook is run, each task's status impacts the overall playbook status.
Here's what happens based on task outcomes:
Status When All Tasks Succeed:
If all tasks finish successfully, the playbook status is marked as Success.
Status When Some Tasks Fail:
If one or more tasks in the playbook fail, but others succeed, the playbook status generally changes to Attention required. This status indicates that the playbook completed execution but requires review due to one or more tasks failing.
This is different from a complete Failed status, which is used if the playbook cannot proceed due to a critical error in an early task, often one that upstream tasks depend on.
NEW QUESTION # 24
Which statement about sending notifications with incident updates is true?
- A. Each connector used can have different notification settings
- B. You must configure an output profile to send notifications by email.
- C. Each incident can send notification to a single external platform.
- D. Notifications can be sent only when an incident is created oi deleted.
Answer: A
NEW QUESTION # 25
You are tasked with finding logs corresponding to a suspected attack on your network. You need to use an interface where all identified threats within timeframe are listed and organized. You also need to be able to quickly export the information to a PDF file.
Where can you go to accomplish this task?
- A. Fabric View
- B. Log View
- C. FortiView
- D. Log Browse
Answer: C
Explanation:
FortiView is a comprehensive monitoring system on FortiAnalyzer that integrates real-time and historical data into a single view, including threats. It provides intuitive summary dashboards listing top threats, sources, destinations, and more, all filterable by timeframe and other criteria.
FortiView allows drill-down into detailed threat information and supports exporting data and reports, including to PDF format, facilitating quick sharing and analysis.
https://docs.fortinet.com/document/fortigate/7.6.3/administration-guide/96300/using-the-fortiview- interface
NEW QUESTION # 26
Which statement describes archive logs on FortiAnalyzer?
- A. Logs previously collected from devices that are offline
- B. Logs that are indexed and stored in the SQL database
- C. Logs a FortiAnalyzer administrator can access in FortiView
- D. Logs compressed and saved in files with the .gz extension
Answer: D
Explanation:
Archive logs on FortiAnalyzer are logs that have been stored in files and, once a log file reaches its size limit, it is "rolled" and compressed, becoming offline logs. These compressed archive logs are saved as files, typically with the .gz extension, and are not immediately viewable or reportable in FortiView, Log View, or Reports panes.
https://docs.fortinet.com/document/fortianalyzer/7.6.3/administration-guide/761825/analytics-and- archive-logs
NEW QUESTION # 27
Refer to Exhibit. What does the data point at 21:20 indicate?
- A. The fortilogd daemon is ahead in indexing by one log.
- B. The SQL database requires a rebuild because of high receive lag.
- C. FortiAnalyzer is temporarily buffering received logs so older logs can be indexed first.
- D. FortiAnalyzer is indexing logs faster than logs are being received.
Answer: D
Explanation:
The exhibit shows a graph that tracks two metrics over time: Receive Rate and Insert Rate.
These two rates are crucial for understanding the log processing behavior in FortiAnalyzer.
Understanding Receive Rate and Insert Rate:
Receive Rate: This is the rate at which FortiAnalyzer is receiving logs from connected devices.
Insert Rate: This is the rate at which FortiAnalyzer is indexing (inserting) logs into its database for storage and analysis.
Data Point at 21:20:
At 21:20, the Insert Rate line is above the Receive Rate line, indicating that FortiAnalyzer is inserting logs into its database at a faster rate than it is receiving them. This situation suggests that FortiAnalyzer is able to keep up with the incoming logs and is possibly processing a backlog or temporarily received logs faster than new logs are coming in.
NEW QUESTION # 28
What is the purpose of playbook trigger variables?
- A. To store the start the times of playbooks with On_Schedule triggers
- B. To use information from the trigger to filter the action in a task
- C. To provide the trigger information to make the playbook start running
- D. To display statistics about the playbook runtime
Answer: D
NEW QUESTION # 29
Which statement about sending notifications with incident update is true?
- A. You can send notifications to multiple external platforms.
- B. Notifications can be sent only when an incident is updated or deleted.
- C. Notifications can be sent only by email.
- D. If you use multiple fabric connectors, all connectors must have the same settings.
Answer: A
Explanation:
In FortiOS and FortiAnalyzer, incident notifications can be sent to multiple external platforms, not limited to a single method such as email. Fortinet's security fabric and integration capabilities allow notifications to be sent through various fabric connectors and third-party integrations. This flexibility is designed to ensure that incident updates reach relevant personnel or systems using preferred communication channels, such as email, Syslog, SNMP, or integration with SIEM platforms.
NEW QUESTION # 30
Which two statements about exporting and importing playbacks are true? (Choose two.)
- A. You can import a playbook even if there is another one win the same name in the destination
- B. Playbooks can so imported 10 a different FortiAnayzer device, but only if the connectors already exist
- C. You can export only one playbook at a time.
- D. A playbook that was disabled when it was exported mil be disabled when it is imported.
Answer: A,C
NEW QUESTION # 31
You must find a specific security event log in the FortiAnalyzer logs displayed in FortiView, but, so far, you have been uncuccessful.
Which two tasks should you perform to investigate why you are having this issue? (Choose two.)
- A. Review the ADOM data policy
- B. Open .gz log files in FortiView.
- C. Check logs in the Log Browse
- D. Rebuild the SQL database and check FortiView.
Answer: B,D
NEW QUESTION # 32
Refer to the exhibit. What does the data point at 12:20 indicate?
- A. The sqiplugind service is caught up with the logs
- B. The log insert log time is increasing.
- C. The performance of FortiAnalyzer is below the baseline.
- D. FortiAnalyzer is using its cache to avoid dropping logs.
Answer: B
Explanation:
Insert Rate vs. Receive Rate is a graph that shows the rate at which raw logs reach the FortiAnalyzer (receive rate) and the rate at which they are indexed (insert rate) by the SQL database and the sqlplugind daemon. At minimum, the difference between these parameters should be generally consistent.
Log Insert Lag Time shows the amount of time between when a log was received and when it was indexed. Ideally, this parameter should be as small as possible with the occasional spikes according to the network activity being logged. A good baseline should be created to allow for the identification of possible performance issues.
NEW QUESTION # 33
Exhibit. A fortiAnalyzer analyst is customizing a SQL query to use in a report. Which SQL query should the analyst run to get the expected results?
- A.
- B.
- C.
- D.
Answer: C
Explanation:
The requirement here is to construct a SQL query that retrieves logs with specific fields, namely
"Source IP" and "Destination Port," for entries where the source IP address matches 10.0.1.10.
The correct syntax is essential for selecting, filtering, ordering, and grouping the results as shown in the expected outcome.
NEW QUESTION # 34
Which statement about automation connectors in FortiAnalyzer is true?
- A. The local connector becomes available after you configured any external connector.
- B. An ADOM with the Fabric type comes with multiple connectors configured.
- C. The local connector becomes available after you connectors are displayed.
- D. The actions available with FortiOS connectors are determined by automation rules configured on FortiGate.
Answer: D
NEW QUESTION # 35
What is the purpose of using data selectors when configuring event handlers?
- A. They filter the types of logs that FortiAnalyzer can accept from registered devices.
- B. They download new filters can be used in event handlers.
- C. They are common filters that can be applied simultaneously to all event handlers.
- D. They apply their filter criteria to the entire event handler so that you don't have to configure the same criteria in the individual rules.
Answer: D
NEW QUESTION # 36
Exhibit. What can you conclude from this output?
- A. Archive logs are using more space than analytic logs.
- B. There is not disk quota allocated to quarantining files.
- C. The allocated disk quote to ADOM1 is 3 GB.
- D. FGT_B is the Security Fabric root.
Answer: C
Explanation:
The exhibit displays a diagnose log device output on a FortiAnalyzer, showing details about disk space usage and quotas for different FortiGate devices and ADOMs (Administrative Domains).
Here's a breakdown of key details:
Disk Quota for Quarantined Files:
The output includes columns labeled for used space in categories such as "logs," "quarantine,"
"content," and "DB." For each device, the quarantine column consistently shows 0.0KB used, indicating that there is no disk quota allocated or utilized for quarantining files.
NEW QUESTION # 37
Which two statements about local logs on FortiAnalyzer are true? (Choose two.)
- A. You can view playbook logs for all ADOMs in the root ADOM.
- B. Event logs show system-wide information, whereas application logs are ADOM specific.
- C. They are not supported in FortiView.
- D. Event logs are available only in the root ADOM.
Answer: A,B
Explanation:
Playbook logs, which relate to automated incident response actions, can be viewed centrally in the root ADOM, allowing visibility across all ADOMs.
Event logs on FortiAnalyzer typically provide system-wide information applicable to the entire FortiAnalyzer unit, while application logs are specific to each ADOM, reflecting the logs related to devices and activities managed within that ADOM.
https://docs.fortinet.com/document/fortianalyzer/7.6.3/administration-guide/208717/enabling-and- disabling-the-adom-feature
NEW QUESTION # 38
......
Get Ready with FCP_FAZ_AN-7.6 Exam Dumps: https://measureup.preppdf.com/Fortinet/FCP_FAZ_AN-7.6-prepaway-exam-dumps.html